HCLTech is hiring a Principal Architect for high-speed analog design in Bangalore. See skills needed, who can apply, how to apply by email, and interview tips.
If you have worked on high-speed chips for many years and you want to lead a team, this job may be a good fit. HCLTech is hiring an Analog Circuit Design Principal Architect in Bangalore. The company wants someone with 15 or more years of experience in high-speed analog and mixed-signal design.
In this post, we explain the job in plain words. You will see what skills they ask for, what each skill means, what the day-to-day work may look like, how to apply, and a few tips that can help your profile get noticed. We have also added questions that people usually ask about this kind of role.
Quick note: The details of the job come from the hiring post shared by HCLTech. Anything we describe as “typical” is general knowledge about this kind of role, not an official HCLTech statement. Always check the final details with the recruiter.

Job at a Glance
| Company | HCLTech |
| Job title | Analog Circuit Design – Principal Architect |
| Area | High-Speed Analog / Mixed-Signal IC Design |
| Location | Bangalore |
| Experience needed | 15+ years |
| How to apply | Email your updated profile (resume) to adasunarsima.karthik@hcltech.com |
What Is This Job About?
A Principal Architect is a senior person in the design team. This is not only a “design the circuit and hand it over” job. The role covers the full path, from the first idea (architecture) to the working chip (silicon). You decide how the circuit should be built, you design the important blocks, and you guide other engineers when problems come up.
The hiring post mentions leadership “from architecture to silicon”. In simple words, that means you are responsible for the design from the start, and you stay involved until the chip is tested in the lab and works as planned.
What is high-speed analog design?
Every phone, laptop, data centre and car uses chips that send data very fast between each other. Sending data at such high speed is hard, because the signal gets weak, noisy and distorted on the way. High-speed analog engineers build the circuits that send, receive and clean up these signals. This is the work behind things like fast internet links, memory connections and chip-to-chip links.
Skills HCLTech Is Looking For
The post lists four main areas. Here they are as a simple list:
- Architecture and circuit design: strong knowledge of high-speed analog and mixed-signal IC architecture, and transistor-level design.
- High-speed blocks: hands-on work with SerDes, PLL, CDR, high-speed transmitters (TX) and receivers (RX), clocking, and equalization circuits.
- Core concepts: signal integrity, jitter, noise, bandwidth, linearity, and balancing power with performance.
- Real chip experience: PVT and Monte Carlo analysis, post-layout closure, silicon bring-up, failure debug, and technical leadership.
The skills explained in simple words
| Term | What it means |
| SerDes | A pair of circuits that turns many slow data lines into one very fast line, and back again. It saves pins and cost. |
| PLL | Phase-Locked Loop. A circuit that makes a clean, steady clock signal at the speed you need. |
| CDR | Clock and Data Recovery. The receiver finds the timing of the incoming data on its own, so no separate clock wire is needed. |
| TX / RX | Transmitter and receiver. TX sends the signal out. RX picks it up and decides if each bit is a 0 or a 1. |
| Equalization | A way to fix the signal after it has been blurred by the wire or board, so the bits can be read correctly. |
| Jitter | Small timing errors in a signal. Too much jitter means the receiver reads wrong bits. |
| Signal integrity | How well the signal stays clean from one end to the other. |
| PVT | Process, Voltage, Temperature. A chip must work across all the ways these can change. |
| Monte Carlo | A test that runs the circuit many times with small random changes, to see how much real chips will differ. |
| Post-layout closure | Checking that the circuit still meets its goals after the real layout (wires and spacing) is added. |
| Silicon bring-up | The first lab tests on the real chip after it comes back from the factory. |
What Will You Do Day to Day? (Typical for This Role)
HCLTech has not listed a full duty list in the post. Based on the skills they ask for, a role like this usually includes work such as:
- Choosing the design approach for a new high-speed link or clock block.
- Designing and simulating key circuits at transistor level.
- Checking designs across PVT corners and with Monte Carlo runs.
- Working with the layout team so the final design still performs well.
- Reviewing the work of junior and mid-level engineers.
- Testing the first chips in the lab and finding the cause when something does not work.
- Talking with other teams and, in many cases, with customers about plans and risks.
Who Should Apply?
This job is a good match if most of these points sound like you:
- You have 15 or more years in analog or mixed-signal chip design.
- You have designed at least a few of these blocks yourself: SerDes, PLL, CDR, TX, RX or clocking.
- You have taken a design to silicon and have seen it work (or fail) in the lab.
- You can explain a hard problem in simple words to a team.
- You enjoy guiding people, not only writing circuits.
- You can work in Bangalore.
If you have 8 to 12 years of experience, this exact role may be too senior for now. Look for Senior or Lead Engineer roles first, and build the lab and leadership side of your profile.
How to Make Your Profile Stand Out
Recruiters read many profiles for a senior job like this. These simple steps can help yours get a second look:
- Put the high-speed work at the top. List SerDes, PLL, CDR and the other blocks you built in the first half page.
- Write numbers. For example: data rate, process node, jitter result, power per bit, or the size of the team you led.
- Show chips that reached silicon. Say how many tape-outs you were part of and what your role was in each.
- Add one real debug story. A short example of a failure you found on silicon and how you fixed it says a lot about you.
- Show leadership. Mention people you guided, reviews you led, and decisions you made on architecture.
- Keep it short. Two to three pages is enough. Skip old or unrelated projects.
- Use the right email subject line. Something like: “Application – Analog Principal Architect – Bangalore – 15+ Years” is clear and easy to find.
What You May Be Asked in the Interview
There is no official interview list in the post, so treat this as a practice guide. For a senior analog role, these topics come up often:
| Topic | Example of what may be asked |
| Architecture | Why did you pick this design for the link? What other options did you think about? |
| PLL and clocking | How do you trade off jitter, power and area? What decides the loop bandwidth? |
| CDR and RX | How does your receiver recover timing? How do you handle noise and skew? |
| Equalization | When do you use CTLE, FFE or DFE, and why? |
| Corners and Monte Carlo | How do you decide that the design is safe across PVT and process spread? |
| Post-layout | What changed between pre-layout and post-layout results, and how did you fix it? |
| Silicon debug | Tell us about a chip that did not work at first. How did you find the cause? |
| Leadership | How do you review other people’s designs? How do you handle a team that is behind schedule? |
How to Apply
HCLTech asks candidates to apply by email. Follow these steps:
- Update your resume with the points above.
- Write a new email to adasunarsima.karthik@hcltech.com.
- Use a clear subject line, such as: Application – Analog Principal Architect – Bangalore.
- Attach your resume. In the email body, write 4 to 5 lines about your experience, your notice period, your current and expected pay, and your current location.
- Wait for a reply. If you do not hear back in a week or two, you can send one polite reminder.
Stay safe: A real company will not ask you to pay money for a job. Before you send private documents like ID proofs, make sure you are talking to a real HCLTech person. You can also check the HCLTech careers page on the official website.
Frequently Asked Questions
Where is this job based?
The job is in Bangalore.
How much experience is needed?
The post asks for 15 or more years of experience.
Is this job only for people who know SerDes?
SerDes is the main focus, but the post also lists PLL, CDR, TX, RX, clocking and equalization. Strong experience in several of these is a big plus.
Can I apply if I only worked on low-speed analog circuits?
It is a hard fit. The role is about high-speed design, so the team will look for proof of work at high data rates.
Do I need silicon experience?
Yes. The post mentions silicon bring-up and failure debug, so you should have worked on real chips and not only simulations.
How do I apply?
Send your updated profile by email to adasunarsima.karthik@hcltech.com.
What is the salary?
The post does not share the pay. This is normally talked about with the recruiter after your profile is shortlisted.
Final Words
The HCLTech Principal Architect role is meant for someone who has spent many years in high-speed analog design and is ready to lead from the first idea to working silicon. If your work includes SerDes, PLL, CDR, clocking and equalization, and you have real lab and leadership experience, this is worth a try.
Send your updated profile to adasunarsima.karthik@hcltech.com and make sure it shows clear numbers, real chips and your leadership work. Good luck!